Director says Director says: If your company intro needs a nap, it has too many bullet points.
How to Make a Company Introduction Video, Step by Step
A good company introduction video answers three things fast: who you help, what you do, and why anyone should care. Pick one viewer, one promise, and one proof point before you write. If the first draft rambles, your audience will too.
Your idea, ready to go“Make a 45-second company intro for Northside Coffee Roasters. Show who we are, how we source beans, and why local shops choose us.”
Make this filmSign up takes a minute. The idea is filled in, and you can change every word.
A company introduction video has one job. It should help a stranger place you in a few seconds. Not admire you. Not study your org chart. Just get the point and keep watching.
That sounds simple. It rarely is. Most company intro films try to say everything, so they say nothing. The fix is to choose one viewer, one job, and one next step before you write a single line.
Before you script: choose one job for the film
Start by picking the person you want to reach. A new website visitor needs different words than a sales lead. A job candidate needs different proof than a buyer. If you write for everyone, you write for no one.
Use this quick checklist before you draft anything:
- Viewer: Who is watching first?
- Goal: What should they understand?
- Proof: What can you show that makes it believable?
- Next step: What should they do after watching?
Then choose one job for the film. It can explain the company, support sales, or warm up trust. That is enough. A short intro film is not a catalog. It is a guided first glance.
Give the film one main point and one proof point. As a rough working range, 30 to 75 seconds often fits a company intro. Shorter works when the viewer is busy. Longer works only when every line earns its place. The platform matters too, so a homepage film may breathe differently than a feed cut.
Also decide where it will live first. A homepage needs quick clarity. A sales email needs a tight hook. A social feed needs strong visuals fast. The same film can work in all three, but one place should lead the design.
Step 1: write the one-sentence promise
Begin with a simple sentence: we help [who] do [what] without [pain]. That is not fancy, but it gets you moving. It also shows where the sentence is weak.
If you cannot say it plainly, the film will wander. Use your homepage, pitch deck, brochure, or About page as source material. Pull the plain words first. Skip slogans for now. They can come later if they still fit.
A company film can start from a sentence, a script, a document, a template, a voice recording, or a website address. That gives you a few ways in, which is nice when the blank page starts acting rude.
Step 2: gather only the proof that matters
Now choose two or three proof points. Pick things a viewer can understand in one glance. A process. A product. A team habit. A location. A before and after. The proof should make the promise believable, not crowded.
Show the problem before you show the solution. That order matters. People care more once they recognize their own mess. Then they are ready to hear how you fix it.
Do not try to cover every service or every department. That is how a 45 second film becomes a 4 minute apology. A short intro film works best when it leaves people wanting the next page, not the full handbook.
When you pull proof from a website or document, keep only the lines that earn their place on screen. If a detail needs a long explanation, it may belong on the page, not in the film.
Step 3: build a script that fits the time
Write for spoken words, not page copy. What looks neat on a web page often sounds stiff in a voice. Read every line out loud. If you run out of breath, the viewer will too.
A 45 second film usually needs about 90 to 120 spoken words. That is a rough guide, not a rule. Pace changes it. So does the voice. A calm read can stretch. A brisk read can shrink. The range just keeps you honest.
Use short sentences. Use one idea per line. Open with the problem, move to the company, then end with the next step. That order helps the viewer know where to stand.
Write one clean sample outline before you polish anything: hook, problem, proof, next step. If that outline works in plain words, the film usually has a spine. If it does not, the script still needs work.
One practical rule helps here. Say the words out loud and cut anything that trips the tongue. If a line sounds clever on paper but clunky in speech, it will slow the film down.
One more practical note. If your company serves more than one audience, make one film per audience. Sales people, buyers, and job candidates do not all care about the same proof. A single script can still be honest, but it should not try to be everyone’s favorite.
Step 4: choose the look, voice, and format
Now decide what the film should do on screen. Friendly motion can make a service company seem human. Clean typography can make a B2B intro look sharp and direct. Softer pacing can help when trust matters more than speed.
Match the pace to the audience. A B2B intro often works best when it is clear, not flashy. A local shop might want warmer music and looser pacing. A startup may want crisp motion and a faster open. The right answer is the one that fits your viewer.
Choose the format early too. Wide works well on websites. Tall works well on phones. Square is useful in feeds. If you need all three, build the film to support them from the start.
A finished film can also be changed by hand. You can adjust colours, pace, framing, music, and word size. You can also change where it starts and ends. Every saved version is kept, and every change can be undone.
Want to see your own website colours first? Paste a web address on the front page and Nine reads the colours, lettering, and words of that site. Seeing your film in your own colours is free and needs no account. That is handy when you are checking brand fit before you go any further.
One helpful example is this spec film, made from a website alone: Ruter: T-bane, people who walk like people. It shows how far a clear website can take a short film.
Step 5: review it like a stranger would
Watch the film once with sound on. Then watch it again with sound off. If the story only works one way, something is missing. A company intro should make sense even when someone is half distracted.
Ask one simple question: can a stranger place the company in the first 10 seconds? If not, tighten the opening. The first shot, first line, or first title needs to do real work.
Cut any words that sound nice but say nothing. That includes internal language, vague claims, and fluffy lead-ins. If a line would not help a new customer, it probably does not belong.
Send a private review link to a colleague or client and collect notes pinned to moments. That keeps comments tied to the exact part of the film, instead of living in a messy email thread.
If you need several languages, make one film per language from each translated script. That is the clean way to keep the words natural. A single voice swap rarely fixes a script written in the wrong shape.
Step 6: publish it where it will actually help
Put the film where people already ask questions. The homepage is common. So is a sales page or intro email. If the film has to hunt for attention, it will lose.
Keep a shorter version for social feeds if needed. That is often the best use of a company intro cutdown. The long cut can live on the website. The short cut can point people there.
Add a clear next step. Contact us. Book a call. Read more. Watch the demo. A company intro should open a door, not leave the viewer in the lobby.
If you want a second example, this public information spec film shows how a company message can stay simple when the topic changes fast: Ruter: The metro closes, buses and trams take over. It is a different kind of film, but the pacing lesson still helps.
What usually goes wrong
- The script tries to cover every service, so nothing lands.
- The open starts with a logo, when it should start with a real problem.
- The voice sounds formal, but the company is actually friendly.
- The film is built only for one screen, so it looks awkward elsewhere.
- No one decides what the viewer should do next.
The fix is usually not a bigger budget. It is a smaller message. One viewer. One promise. One proof point. One next step. That is the whole trick, really.
How long does it take?
For a simple company intro, the work is usually front-loaded. Picking the message can take the longest. Once that is clear, the script moves faster. A first draft can often happen in an afternoon. Review and cleanup may take one or two more passes.
If you already have a clear website or pitch deck, you are ahead. If you have to find the message from scratch, expect to spend more time on decisions than on wording. That is normal. The words get easier after the choices are made.
A film of your own comes with a plan. Plans and what they include are on the prices page at /pricing. If you want to try a first version, you can start from a sentence, a document, or a website address. You can also try a free film at /free-film.
FAQ
How long should a company introduction video be?
Most company intro videos work well at 30 to 75 seconds. That gives you enough room to explain the company without losing attention. If the film is for a homepage, shorter is often better. If it is for a sales page, you can go a little longer, as long as every line adds something useful.
What should a company intro video say first?
Say who you help and what you help them do. Then give one clear reason to care. The first few seconds should help the viewer place the company fast. A logo alone usually does not do that job.
Do I need actors or a live shoot?
No. Many company intro videos work well with motion, text, product shots, screen captures, or simple illustrated scenes. A live shoot can be great, but it is not required. What matters most is clear words and clear pictures that match those words.
Can one company video work on a website and social media?
Yes, if you plan for both from the start. Build a wide version for the website, then make tall or square versions for social. Keep the first few seconds strong, because feeds move fast. One film can serve several places if the framing and timing are set up well.
What is the difference between a brand film and a company introduction video?
A company introduction video explains who you are and what you do. A brand film can be broader. It may lean more on tone, values, or a feeling. The overlap is big, but the intro film has a more direct job. It should help a new viewer understand you quickly.
Ideas you can make
- Homepage hello in 45 secondsMake a short film for a made-up company, Northfield Supply. Open with the customer problem, show two proof points, and end with a clear homepage call to action.Make this film
- Sales intro for a busy buyerCreate a 30 second company intro for Summit Ledger, built for a sales email. Keep the words plain, add one process scene, and finish with a book-a-call line.Make this film
- Hiring page first impressionMake a warm intro film for Harborline Studio that helps a job candidate understand the team, the work style, and why people stay.Make this film
- Website page to filmTurn a mock About page for Pine & Oak into a short brand film. Use only the page copy, then trim it until it fits 60 seconds.Make this film
- Phone-first company filmCreate a square, phone-friendly intro for Blue Finch Repairs. Keep the first five seconds visual, then explain what they fix and how fast they respond.Make this film
- Plainspoken product company introMake a calm company film for Westrow Parts. Show one product family, one service promise, and one reason local customers return.Make this film
Questions people ask
How long should a company introduction video be?
Most company intro videos work well at 30 to 75 seconds. That gives you enough room to explain the company without losing attention. If the film is for a homepage, shorter is often better. If it is for a sales page, you can go a little longer, as long as every line adds something useful.
What should a company intro video say first?
Say who you help and what you help them do. Then give one clear reason to care. The first few seconds should help the viewer place the company fast. A logo alone usually does not do that job.
Do I need actors or a live shoot?
No. Many company intro videos work well with motion, text, product shots, screen captures, or simple illustrated scenes. A live shoot can be great, but it is not required. What matters most is clear words and clear pictures that match those words.
Can one company video work on a website and social media?
Yes, if you plan for both from the start. Build a wide version for the website, then make tall or square versions for social. Keep the first few seconds strong, because feeds move fast. One film can serve several places if the framing and timing are set up well.
What is the difference between a brand film and a company introduction video?
A company introduction video explains who you are and what you do. A brand film can be broader. It may lean more on tone, values, or a feeling. The overlap is big, but the intro film has a more direct job. It should help a new viewer understand you quickly.
Your idea, ready to go“Make a 45-second company intro for Northside Coffee Roasters. Show who we are, how we source beans, and why local shops choose us.”
Make this filmSign up takes a minute. The idea is filled in, and you can change every word.
Keep reading
- What is Nine (nine.film)? The film studio, not the 2009 filmnine.film is an online film studio called Nine. You give it your website, an idea, a script or a voice recording, and a small crew of film helpers makes a short animated film in your own colours and typeface while you watch. It is made by NorwAI AS in Oslo, Norway, and it is not the 2009 film called Nine.
- Farewell video for a colleague who is leaving: ideas and how to make itA good farewell video for a colleague is short, about two to three minutes, built on one idea that fits the person, with a few short messages from the team. Collect clips by a set day, keep each message under twenty seconds, and play it at the leaving drinks.
- Product launch video: what to show, how long, and when to post itA product launch video should show one product, the one problem it solves, and where to get it, in 15 to 45 seconds. Lead with the problem, show the product doing its job, end with a date and a place, and make a tall and a wide version.
- Training and safety videos: how to make a procedure people followA training or safety video works when it teaches one procedure, in the real order of the steps, shows the dangerous moment clearly, lasts one to three minutes, and is checked with the people who do the job. Split long procedures into short parts.